When hot working Inconel 625 alloy, it is necessary to determine the appropriate hot working process parameters according to the specific process requirements and application environment and other factors. The following are details of some common Inconel 625 alloy hot working process parameters:
1. Hot working temperature: The hot working temperature of Inconel 625 alloy is usually in the range of 980-1180°C, of which the most common hot working temperature is 1050°C. The hot working temperature of Inconel 625 alloy is 1050°C, and the hot working temperature of Inconel 625 alloy is 1050°C. It should be noted that too high a hot working temperature can lead to grain growth of the alloy, thus affecting its mechanical properties.
2. Deformation: The deformation of Inconel 625 alloy is usually in the range of 20%-70%, where 20%-40% deformation is suitable for processes such as extrusion and rolling, and 40%-70% deformation is suitable for processes such as forging. It should be noted that too large a deformation will lead to alloy grain fragmentation, thus affecting its mechanical properties.
3. Deformation speed: The deformation speed of Inconel 625 alloy is usually in the range of 1-100mm/s, which needs to be determined according to the specific process requirements and application environment and other factors to determine the appropriate deformation speed. It should be noted that too fast a deformation rate can lead to cracks and defects on the surface of the alloy.
4. Holding time: The holding time of Inconel 625 alloy is usually between 1-4 hours, and it is necessary to determine the appropriate holding time according to the specific process requirements and application environment and other factors. It should be noted that too long holding time will lead to alloy grain growth, thus affecting its mechanical properties.
5. Holding mode: Inconel 625 alloy holding mode usually have air cooling, water cooling and oil cooling and other ways. According to the specific process requirements and application environment and other factors to determine the appropriate insulation method.
The above are some common Inconel 625 alloy heat processing process parameters in detail. In practical application, according to the specific process requirements, application environment and other factors, comprehensive adjustment of the parameters to ensure that the alloy’s metallurgical organization and mechanical properties meet the requirements.
===========================================
www.antonmetal.com
ANTON METAL｜ Your specialty metals manufacturer
Email: dominic@antonmetal.com
Contact No.: +8613132148618(wechat/whatsapp)
Post time: Aug-12-2023
